Table of Contents
Advertisement
3 Identification Data
The identification label is located on the back of the unit.
For technical assistance contact QUANTA S.r.l. using references in the footer of this manual.
4 The DQ61
4.1
Terms and conditions of intended use
The DQ61 is an electronic control unit, designed to be used to monitor and control the temperature of electrical
machines, e.g. medium/high voltage transformers or electrical motors.
Since it is not possible to know in advance what are the real application conditions in which the device will be
utilized, and given the great variability of the fields of application, it is responsibility of the user to determine the
suitability of DQ61 in perform properly the specific application.
QUANTA S.r.l. is available to provide the know-how to help customers in the evaluation of the specific
suitability of the DQ61.
The DQ61 is a device classified under Measure Category III according to EN61010-1,
permanently connected.
The device must be installed inside an electrical panel and shall be placed in proximity
of a switch in order to allow for a swift disconnection from the power supply.
The connection cables, including power cables must be secured and protected against
the danger of direct contact to the operators.
Working on the device shall only be done after power to the panel has been
disconnected.
Via A. Ferrarin, 19-23 • 50145 Firenze (Italy) • Tel.: +39 055 3024555 • Fax: +39 055 317844
P. I.V.A. e Cod. Fisc.: IT 04273220485
Banche: INTESA-SAN PAOLO - ABI: 06160, CAB: 02848
http:
http:
Figure 1
REA CCIAA Firenze: n. 0433306 • Registro Imprese n. FI017 -58513
e-mail:
www.quanta.it
www.quantasrl.eu
P.E.C.:
UNICREDIT – ABI 02008, CAB: 38106
acquisti@quanta.it
contabilita@quanta.it
ufficiotecnico@quanta.it
quanta@pec.quanta.it
Pag. 4
Advertisement
Table of Contents
