Table of Contents
Advertisement
Default 19.200. (Allowed values: between 1.200 and 38.400 baud).
If the RS485 MODBUS option is not installed, the value indicated is
Choice of unit between °C and °F.
Default °C.
Buzzer Enable on Alarm
Default YES.
Warning: when the buzzer is disabled it does not sound on activation relay ALARM, TRIP relay and
relay FAULT.
Default Setting
Default NO.
This selection resets the device to factory settings.
6.2.7 INSTRUMENT INFO
This menu shows the software revision and hours of
working hours counter. The total counter can not be reset.
6.2.8 OUTPUT TEST
This menu allows you to check the operation of the output relays and LEDs associated with. You select the
and , and then pressing the key
relay to test using keys
the MENU button the test ends, the relays and the LEDs resume their work status
By entering this menu, any alarms are turned off to allow the test and are reactivated at the return of the normal
operating condition.
Via A. Ferrarin, 19-23 • 50145 Firenze (Italy) • Tel.: +39 055 3024555 • Fax: +39 055 317844
P. I.V.A. e Cod. Fisc.: IT 04273220485
Banche: INTESA-SAN PAOLO - ABI: 06160, CAB: 02848
http:
http:
.
.
.
work.
Pressing twice the key
REA CCIAA Firenze: n. 0433306 • Registro Imprese n. FI017 -58513
e-mail:
www.quanta.it
www.quantasrl.eu
P.E.C.:
and will not be editable.
you can reset the partial
switching from off to on and vice
UNICREDIT – ABI 02008, CAB: 38106
acquisti@quanta.it
contabilita@quanta.it
ufficiotecnico@quanta.it
quanta@pec.quanta.it
versa.
Pressing
Pag. 17
Advertisement
Table of Contents
