Info For Use Under Windows 10; Support - ZUM Radio MMDVM-Pi User Manual

Elite 3.5 LCD ZUMspot kit user guide
● Use that IP address to connect to pi-star. In your preferred web browser enter the
following: http://IP_ADDRESS
○ Replace IP_ADDRESS with the one you found in Angry IP Scanner. In the example
image above the IP address is 192.168.1.14 So in that example,
http://192.168.1.14
Pi-Star

Info for use under Windows 10

This is a web page with a good tutorial on how to use the mmdvmcal software tool and a spectrum
analyzer to adjustment the signal levels for DMR:
https://www.f5uii.net/en/installation-calibration-adjustment-tunning-mmdvm-mmdvmhost-raspberry-
motorola-gm360/5/
Another document describing the spectrum adjustment process:
http://www.swedmr.se/wp-content/uploads/2017/08/Justering-av-repeater-med-MMDVM.pdf

Support

Great video from W1MSG showing getting started with Pi-Star:
https://www.youtube.com/watch?v=B5G4gYDdJeQ
MMDVM groups.io group:
https://groups.io/g/OpenDV
Pi-Star support forum:
https://forum.pistar.uk/
Copyright 2019-2022 ZUM Radio, Inc
would be what you would type into a web browser to access
21 Rev 1.0