Specifications - BIO-MED DEVICES IC-2A Instruction Manual

C. SPECIFICATIONS
Gas Supply
Logic Oxygen:
Patient Supply:
Inspiratory Time:
Flow rate:
Maximum Pressure Setting:
Pressure Gauge:
Failsafe Two-Way Relief Valve: (Installed internally) opens at pressures above
PEEP/CPAP Range:
Logic Gas Consumption:
Weight:
Physical Dimensions:
Storage Temperature:
Operating Temperature:
2
INSP. TIME and EXP. TIME control settings are calibrated at sea level and 20 degrees Celsius, using
USP oxygen. Large changes of barometric pressure or altitude changes, or use of diluted oxygen will
affect time calibration. Time settings are repeatable within 5%.
pressure.
32° to 122°F (0°to 50°C)
14° to 122°F (-10°to 50°C)
Clean, dry, medical grade 50 ±5 psi (345 ±34.5
kPa ) 100% oxygen.
Clean, dry, oil free 50 ±5 psi (345 ±34.5 kPa )
patient breathing gas mixture.
2
Calibrated from 0.5 to 4 seconds (variable to 45
seconds or more, uncalibrated, in the IMV
range).
Calibrated from 0 to 75 LPM.
Variable from 0 to 120 ±20 cmH
dependent upon the type of exhalation valve
used. The IC-2A is calibrated using the Bio-Med
Devices disposable patient circuit and exhalation
valve, Part #8002A.
O; ±3% full-scale accuracy.
-10 to +120 cmH
2
120 ±20 cmH O or below -4 ±1 cmH
2
Variable from 0 to 25 ±5 cmH
Approximately 12 LPM.
settings. Higher
consumption.
4.1 kg (9 lbs.)
8.57 X 15.56 X 26.04 cm (3-1/8 x 6-1/8 x 10-1/4
in.)
O. This is
2
O.
2
O.
2
Varies with control
pressure increases
17