Skil LL9000 Owner's Manual

To reduce the risk of injury, the user must read and understand
WARNING
the Operator's Manual before using this product. Save these
instructions for future reference.
1/4'' Screw
Handle
Platform
Center
Column
Locking
Knob 1
Adjustable Foot
Owner's Manual Using With the Tripod
NOTE: The tripod provides a stable, height-adjustable support (up to 43 inches). It
may be utilized on a compact hand-held tool that includes a ¼'' -20 UNC threaded
mounting hole that will not cause the assembly tip tip-over after mounting.
Thread the ¼" -20 UNC tripod screw into the ¼" -20 UNC threaded mounting hole
•
on your tool. Secure your tool with the 1/4'' screw platform on the tripod.
Loosen locking knob 1. Rotate the crank until the desired height is attained.
•
Model: LL9000
Tighten locking knob 1 to lock the center column in position (FIG. 1).
Tripod
Fig. 1
Locking
Knob 3
Mounting
Plate
Loosen locking knob 2. Adjust the
•
mounting plate to the desired position;
the maximum adjustment scale is 90°.
¼'' -20UNC
After adjustment, tighten locking knob
Screw
2 to lock the mounting plate in position
(FIG. 2).
Locking
Knob 2
Crank
Loosen locking knob 3 to pan the head left or right. The maximum adjustment
•
scale is 360°. After adjustment, tighten locking knob 3 to lock the position
(FIG. 3).
Fig. 3
Flip Lever
Manually raise the column to the
height desired.
Fig. 2
90
o
360
o
L o o s e n t h e h a n d l e b y t w i s t i n g i t
Fig. 4
•
counterclockwise. The mounting plate
can be tilted by moving the handle up or
down; the maximum adjustment scale
is 360°. After adjustment, tighten the
handle clockwise to lock the position
(FIG. 4).
Open the 3 flip levers on one leg to Fig. 5
•
release that leg for adjustment. Extend
the leg to the proper height. Close the
levers to lock the leg in position. Repeat
for the other two legs (FIG. 5).
360
o