Table of Contents
Advertisement
Troubleshooting
If the following problems occur to
solutions can be adopted.
Symptoms
The dehumidifier does not
run
The dehumidification
function is not effective
Air is not blown out
Noise is abnormal during
operation
Water leaks
Frosting occurs
Display code
FL
E1
E2
P1
CL
LC
EN
Possible reasons
Does power plug fall?
Is the water tank full of water? (the
water tank is full of water or is placed
at incorrect position)
The ambient temperature is lower
than 41℉ or higher than 90℉
Is the room temperature or humidity
too low?
Are the air outlet and inlet blocked?
Is the air strainer blocked?
Is the dehumidifier placed improperly
so that it is inclined or unstable?
Is the air strainer blocked?
There is "tittering" sound
Connection of drainage pipe becomes
loose
Drainage system is blocked
The ambient temperature is low, and
it is in the state waiting
Instrustion
The water tank is full
The coil sensor detects anomaly
The room temperature sensor detects
anomaly
The unit is in the defrosting state,normal
T
he unit is in the internal drying state,normal
Child lock funtcion starts
the dehumidifier,
the following
Insert power plug into socket.
Drain water from the water
tank, and then
water tank again.
Normal phenomenon
In
dry
dehumidification ability will
reduce.
Clean up the objects blocking
the air outlet and inlet.
Clean
according to the
method.
Please place the dehumidifier
in smooth place.
Clean
according
method.
The
flowing
refrigerant, which is a normal
phenomenon.
Fasten drainage pipe.
Remove
straighten out water pipe.
It is a normal phenomenon,
for defrost.
and the dehumidifier has the
automatic defrosting function.
Solutions
install
the
season
the
the
air
strainer
above
the
air
strainer
to
the
above
sound
of
obstacles
and
11
Advertisement
Table of Contents
