Setting The Electronic Delay Time; Starting The Wash Cycle; Interrupting The Wash Cycle; Terminating The Wash Cycle - Bosch SPX68B55UC Use And Care Manual

12.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
Press ⁠ .
1.
a "h:01" appears on the display.
Use to set the required
2.
start time for the wash cycle.
Press ⁠ .
3.
a This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
until "h:00" appears on the dis-
play.
12.6 Starting the wash
cycle
Press .
▶
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡ You can only change a cycle in
progress if you can cancel it
first.
→ "Terminating the wash cy-
cle", Page 27
¡ To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
repeatedly
a All displays light up.
a As soon as the displays are off,
a The cycle is cancelled and
Basic Operation en-us
12.7 Interrupting the wash
cycle
Press On/Off.
1.
The program is saved and the
appliance switches off.
Press On/Off.
2.
Press to resume the wash
3.
cycle.
12.8 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
Press
▶
4 seconds.
the display shows "0h:01m"
and the residual water is
pumped out.
ends after approx. 1 minute.
12.9 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
Do not fully open the door until
▶
water noises have stopped and
steam has subsided.
Please note the information on
1.
Preventing Material Damage
→ Page 9 .
Press On/Off.
2.
for approx.
27