Panasonic NA-F42J2T Service Manual page 17

6. Pull up the tub up-ward to remove.
7. Place the machine on its front side.
8. Remove 4 screws mounting the spinner plate B.
9. Remove 4 screws mounting the mechanism case.
7.4. Motor replacement
1. Place the machine on it's front side.
2. Use plug and cut lead wire from the motor.
3. Loose mounting screws and remove V-belt.
4. Remove bolt mounting the motor and remove the motor.
NOTE
After replace the motor, adjust tension of the V-belt properly, then it
shall be set for initial mode of the V-belt on test running without
water.
17