Haier LT32F6 Service Manual page 7

5) Remote control operation [RC BUTTON]
Option
Default
Function
Remarks
6) Touch keypad Operation [PANEL BUTTON]
Option
Default
Function
Remarks
7) Menu operation [MENU BUTTON]
Option
Default
Function
Remarks
8) OSD display [ON SCREEN DISPLAY]
Option
Default
Function
Disabled
key
Remarks
9) Start mode [INPUT MODE START]
Option
Default
Function
Remarks
"RESPOND","NORESPOND"or"LIMITED"
RESPOND
RESPOND：The remote control is enabled.
・
NO RESPOND：The remote control is disabled. The POWER key is also
・
disabled.
LIMITED：only (POWER, VOLUME ( / ), CHANNEL ( / ) , ATV,DTV
・
key is enabled.
"RESPOND"or"NORESPOND"
RESPOND
RESPOND：The touch keypad is enabled.
NO RESPOND：The touch keypad is disable except the POWER key
"RESPOND"or"NORESPOND"
RESPOND
RESPOND：The "MENU" key is enabled.
NO RESPOND：The "MENU" key is disabled.
"YES","NO"or"LIMITED"
YES
"YES", all of the OSD will display.
・
"NO", all of the OSD will not display.
・
"LIMITED", only a little of OSD will display.
・
"NO"： （aspect、 Sleep Timer、 Menu、 EPG、 Freeze） OSD will be disable
・
to display.
"LIMITED"：only the (POWER, VOLUME ( /
・
( / ) ,Mute, ATV,DTV
∧ ∨
(In Text、text, subtitle, subpage, Reveal hidden Teletext, Top/Bottom/Full,
hold、Mute、color is also enable.)
"NORMAL" or "Input source"
NORMAL
Select the input source when power on.
For Example:
"TVA(2)","TVD(002TV)", "AV", "YPBPR", "SCART2", "PC", "HDMI1",
"HDMI2", "HDMI3", "YPBPR"
TV channel will auto detect the current channel as the input power on source.
If you want to power on at DTV channel 001, you must change the channel to
001 first, then enter hotel mode and set the "INPUT MODE START "item to
TVD (1TV).
∧ ∨
∧ ∨), CHANNEL
，Text）OSD are enabled to display.
7
∧ ∨ ）