Table of Contents
Advertisement
Step 3: Check the F/W version and reset to default.
3.1 Press "MENU"+"1"+"9" +"9" +"9" key rapidly on the Remote control to enter the factory mode (Figure 3.1).
3.2. Check the F/W version on the second row of the factory mode info (eg: the "Ver" info is V2.03). If F/W version is
incorrect, please check the version of F/W in your USB memory, else let's go to step 3.3.
Do the following steps rapidly:
1. Press "MENU/ENTER";
2. Press"1"+"9" +"9" +"9";
Figure 3.1
Figure 3.2
36
Advertisement
Table of Contents
