Electronics Industries Alliance: www.eiae.org. Page PRECAUTIONS For Customer Use: Enter below the serial number that is located on the bottom of the unit. Retain this information for future reference. Model No. Serial No. TF-TV705 Coby Electronics Corporation...
IMPORTANT SAFETY INSTRUCTIONS Read Instructions: All the safety and operating instructions should be read before the product is operated. Retain Instructions: The safety and operating instructions should be retained for future refer- ence. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to.
Page 4
IMPORTANT SAFETY INSTRUCTIONS Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, ground- ing of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the...
Page 5
IMPORTANT SAFETY INSTRUCTIONS Replacement Parts: When replacement parts are required, be sure that your service techni- cian has used replacement parts specified by the manufacturer or have the same charac- teristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
TABLE OF CONTENTS PRECAUTIONS ...2 IMPORTANT SAFETY INSTRUCTIONS ...3 TABLE OF CONTENTS ...6 FEATURES ...7 PACKAGE CONTENTS ...8 LOCATION OF CONTROLS ...9 Left Panel View ...9 Front Panel View ...9 Right Panel View ...9 Rear Panel View ...9 Remote Control ...10 GETTING STARTED ...11 Powering your Device ...
• 7” Widescreen TFT LCD Color Display • LED Backlight Technology provides a brighter display and increased battery life • High-Sensitivity NTSC TV with Digital Tuning • Integrated Telescopic Antenna • Coaxial Antenna Input for use with External Antenna Sources •...
PACKAGE CONTENTS Please make sure the following items are included with your LCD TV/monitor. If any items are missing, contact your local dealer. TF-TV705 Remote Control AC Power Cord AV Cable Coaxial (RF) Antenna Adapter Page Coby Electronics Corporation...
LOCATION OF CONTROLS Left Panel View DC Power In Video In Audio In Headphone Out Front Panel View Stereo Speakers TFT LCD Display AV/TV Mode Menu Volume Down Power Indicator Volume Up Channel Down Channel Up Remote Sensor Right Panel View Coaxial (RF) Antenna In Power Switch (On/Off) www.cobyusa.com...
LOCATION OF CONTROLS Remote Control TV/AV TV or AV Mode Select Call View the current channel number Recall Return to the previous channel Menu Access the Setup Menu Volume Up / Volume Down Adjust the volume level Channel Up / Channel Down Change the channel up or down Numeric Keypad Enter numeric input data.
GETTING STARTED Powering your Device AC Power Operation Your device should be connected to an AC 100-240V wall outlet. • Using the supplied power adapter, plug one end of the adapter into the Power In jack of your device and plug the other end into an AC 100-240V wall outlet. To DC Power In Do not connect the power plug to a power outlet other than that which is indicated here or on the label as this may result in the risk of fire or electric shock.
GETTING STARTED Using the Remote Control To load a battery in the remote: Press in the direction of the arrow Slide the compartment out Place the battery in the compartment with the positive side ( + ) facing up Push the compartment in to close The battery used in this device may present a fire or chemical hazard if mistreated.
GETTING STARTED Cable Connections You can use an AV cable to connect an external device for display on the TF-TV705. Do not connect the power until all connections have been made. Coaxial External Antenna Input (optional) Use a Coaxial (RF) Antenna Adapter to connect an external antenna source for use with the TF- TV705 instead of the built-in telescopic antenna.
Basic Operation Prepare the antenna (optional) and power connections (see the Getting Started section for details) To turn the TV on, set the Power Switch to the “On” position. To set the unit to TV mode, press AV/TV. You should see the antenna signal on screen. To change the channel, press CH+/CH-.
Basic Operation Prepare the AV Input and power connections (see the Getting Started section for details). To turn the TV on, set the Power Switch to the “On” position To set the unit to AV mode, press AV/TV. You should see the AV Input signal on screen To adjust the volume level, press VOL+/VOL- AV Setup Menu Menu Navigation...
TROUBLESHOOTING If you have a problem with this TV, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378...
SPECIFICATIONS Display Type Display Resolution TV System TV Tuning system Power Supply Power Consumption Input Output Operating Temperature Unit Dimensions Weight Specifications and manual are subject to change without prior notice. www.cobyusa.com 7” Widescreen TFT LCD with LED Backlight 480 x 234 NTSC Full Over-The-Air Channels VHF-L: 55.25MHZ ~ 127.25 MHZ...
Page 18
NOTES Page 1 Coby Electronics Corporation...