Nagasoft NSCaster X1 User Manual page 8

4) In order to connect the NSCaster-X1 device output port to the monitor, it has divided into
following categories:

The SDI monitor is connected to the SDI output via an SDI cable.

The HDMI monitor is connected to the HDMI output via HDMI cable.
5) Connect the sound output of the NSCaster-X1 device to an external device or monitor.

Connect to the TRS MIC output through the TRS cable, or connect to the XLR output
interface through the XLR cable as shown below:

Connect to the call output interface through a 3.5mm audio cable as shown below:
6) To start the NSCaster-X1 device, just press the power button on the NSCaster-X1 device as
shown below:
6