Table of Contents
Advertisement
1)Triggers: Click on the
set the Triggers conditions, as shown below:
(1) Triggers parameters: the Triggers can be triggered when the audio source volume
is larger than the setting parameters, and the audio detection range of the triggers
is-40 ~ 20dB.
(2) Source: select the Audio Source Channel.
(3) Action: Select the action to trigger. Call PTZ PRESET: access the camera and set
the preset before triggering. TRANSITION: transfer to the channel after the trigger
condition has been met.
(4) Input: select the trigger channel.
(5) Action parameters: The preset position of PTZ.
(6) Duration: The duration of the trigger.
(7) Delay time: delay trigger when trigger condition is reached.
(8) Button instructions:
trigger conditions.
on, the icon
2)REST:Click the ON button to start the REST service, which uses the REST API to access and
control the device. Devices use a mechanism similar to OAUTH2, where applications can
only get tokens using a specific user name and password, and require the client ID and key
to match the device. The client ID and key are randomly generated and can be modified
with a length of 32 characters. After modification, click the 'Apply' button and apply directly.
Click
to view the key.
Here is what it looks like:
button and
to add and edit Triggers. Pop up the Triggers interface,
Delete a single trigger condition.
Enable or turn off the trigger. When the trigger is turned
appears next to the time of the main interface.
51
Delete the list of
Advertisement
Table of Contents
