Table of Contents
Advertisement
4.9
PnP/PCI Configurations
This section describes the configuration of the PCI bus system. PCI, or
Peripheral Components Interconnect, is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
Phoenix – AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
: Move
Enter: Select
F5: Previous Values
32
PnP/PCI Configurations
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
Installed a new add-on
And the system
Reconfiguration has
Caused such a serious
Conflict that the OS
Cannot boot
ESC: Exit
F1: General Help
Advertisement
Table of Contents
