Table of Contents
Advertisement
2.1
Opening the Delivery Package
The HS-4700 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, and keyboard controller chip to ensure
that they are firmly seated. The HS-4700 delivery package contains the
following items:
HS-4700 Board x 1
Utility CD Disk x 1
ATA/100 IDE flat cable x 2
FDD flat cable x 1
Parallel flat cable x 1
VGA cable +DB15 x 1
10-pin LAN cable + RJ-45 connector x 2
8-pin USB split type cable with bracket x 1
MIC/Audio 8-pin cable + 2 phone jacks x 1
4-in-1 COM Port cable + DB9 connectors x 1
PS/2 K/B & Mouse split-type cable x 1
Jumper Bag x 1
User's Manual
Chapter 2
Unpacking
5
Advertisement
Table of Contents
