Advertisement
i
:
nTroducTion
This manual contains information to help you to learn about the safe and proper use of
the KL30105 Tractor Tire Handler (Fork Option). The instructions included in this manual
are not necessarily all-inclusive. K-Line® cannot anticipate all conceivable or unique
situations. You must make sure all conditions and procedures do not jeopardize your
personal safety.
DISCLAIMER: All information, images, and specifications contained in this manual are
based on the latest information available at the time of publication. K-Line® reserves
the right to make changes at any time without notifying any person or organization of
such revisions or changes. K-Line® is not liable for incidental or consequential damages
(including lost profits) in connection with the furnishing, performance, or use of this
s
p
:
aFeTy
recauTions
Before using the KL30105 Tractor Tire Handler, read, understand, and follow the safety
precautions and operating instructions outlined in this manual. This equipment must be
operated by qualified personnel. The operator must be familiar with the vehicle this tool is be-
ing used on
 If the operator cannot read English, operating instructions and safety precautions must
be read and discussed in the operator's native language.
 Si el operador no puede leer inglés, las instrucciones de operación y las precauciones
de seguridad deberán leerse y comentarse en el idioma nativo del operador.
 Si l'utilisateur ne peut lire l'anglais, les instructions et les consignes de sécurité doivent
lui être expliquées dans sa langue maternelle.
S
I
t
afety
con
ermInology
The following safety icons can be found within this manual.
Personal Protection/Important Information
Read the Manual
Eye Protection
Ear Protection
Face Protection
Inspect Equipment
Prohibited Action
No Smoking
Do Not Weld
Hazard Avoidance
Crushing Hazard
Crushing Hazard (Foot)
Crushing Hazard (Hand)
Pinch Point
Fire Hazard
Safety Alert Symbol
Slipping Hazard
Tripping Hazard
2
P
P
/I
I
erSonal
rotectIon
mPortant
nformatIon
WARNING
To avoid personal injury or death,
carefully read and understand all
instructions before attempting to
operate any equipment or tools. Do
not operate or work on a machine unless you read
and understand the instructions and warnings in
this and all other applicable manuals.
To prevent possible damage to your
hearing, always wear ear protection
when
working
around
noise
generating tools.
To avoid eye injury, always
wear protective glasses
or face shield. Make sure
no one can be injured
by flying objects or debris when using tools or
working on a component.
Clean up all leaked
or
spilled
fluids
immediately.
Oil, fuel,
or cleaning fluid leaked
or spilled onto any hot
surfaces or electrical components can cause a fire,
resulting in personal injury or death.
Personal
injury
result from slips or falls.
DO NOT leave tools or
components
laying
around the work area. Clean up all spilled fluids
immediately.
P
a
rohIbIted
ctIon
To avoid serious or fatal injury, only
use the KL30105 (Fork Option)
Tractor Tire Handler for its intended
purpose, which is supporting Tractor/
Truck tires during removal and installation.
To avoid serious or fatal injury, do
not exceed the Working Load Limit
(WLL) of 10,000 lbs for any wheel/
tire assembly being supported by
the KL30105 Tractor Tire Handler (Fork Option).
h
a
azard
voIdance
WARNING
Inspect prior to each use for dents,
cracks, bends, or worn parts.
damage is found, discontinue use
until inspected and released by an
approved inspector at the dealership.
The complete KL30105
Tractor Tire Handler
weighs approximately
TBD lbs. Personal injury
can result from dropped tooling. Use caution
when transporting, installing, removing, and
storing the tooling.
Personal injury can result from
pinch points.
Use caution when
assembling, installing, and removing
the KL30105 Tractor Tire Handler
(Fork Option).
Personal
death can result from
improper use of this tool
and supporting of the
vehicle. Make sure the
vehicle is properly supported using jack stands
before removing wheels/tires using the KL30105.
Do not work beneath any supported tool.
can
Potential pinch points.
serious injury, DO NOT place your
hand or any part of your body
between the KL30105 Tractor Tire
Handler (Fork Option) and the tractor components.
WARNING
To avoid damage to the tooling, do
not weld on the components.
not modify the KL30105 Tractor Tire
Handler (Fork Option) in any way by
welding, heating with a torch, drilling, machining,
or grinding.
3
If
injury
or
To avoid
Do
Advertisement
