Optical Compressor Pedal
Main Features
Legendary optical compressor, incredible smooth sound
2 Working Modes: Normal/Treble
Full metal shell
Very small and exquisite
True bypass
DC 9V Adapter power supply
Normal: Normal sustain of low noise, long sustain is obtained.
Treble: Sustain of high frequency is emphasized.
3
6
7
8
9
4
5
6. Mode Switch:
Switch between Normal mode and Treble mode.
7. LEVEL Knob:
Adjust the output volume of compressor.
8. ATTACK Knob:
Adjust the intensity of attack.
9. SUSTAIN Knob:
Adjust the sustain time of compression.
Effects Modes:
2 (Normal, Treble)
Input: 1/4" monaural jack (impedance: 220k
Output: 1/4" monaural jack (impedance: 10k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 7 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS
Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Blue Comp, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms
)