Table of Contents
Advertisement
Basic Operation
1.
Prepare the antenna and power connections (see the Getting Started section for details).
2.
Press
to turn the TV on.
3.
Set your TV to display the desired signal.
•
Press
on-screen.
•
Select DTV for digital TV broadcasts (ATSC).
•
Select TV for analog TV broadcasts (NTSC).
4.
Press
or
control to input a channel number directly.
Prior to viewing over-the-air or cable/satellite television, it is recommended that you set
the television to auto-scan for available station channels. To auto-scan, press
enter the System Setup Menu, and then select "Channel > Auto Program".
You may press
TV tuning (NTSC).
System Setup Menu
Access the System Setup Menu to adjust the inter-
nal options and features of your TV.
1.
Press
. The System Setup Menu will
appear on-screen.
2.
Use the Navigation keypad (
select a setup menu category. Press
enter the selected setup menu.
•
With a setup menu, press
select (highlight) a desired option. Press
to confirm the selection.
•
Press
or
3.
Press
to return to a previous menu and to exit the System Setup Menu.
Picture Options Menu
Item
Mode
Brightness
Contrast
Saturation
Tint
Sharpness
Page 1
TV FUNCTION
to set the Input mode to DTV or TV. You should see the desired signal
to change the channel, or use the numeric keypad on the remote
to quickly change between Digital TV tuning (ATSC) or Analog
or
) to
or
to adjust an option.
Select a Picture Mode preset (User, Standard, Movie, Sports)
Adjust the brightness of the display.
Adjust the contrast of the display.
Adjust the color saturation of the display.
Adjust the tint of the display.
Adjust the sharpness of the display.
to
to
Description
Coby Electronics Corporation
to
Advertisement
Table of Contents
