Oven Light - Maytag UMV1152CAS Use And Care Manual

Care and Cleaning
COOKTOP/NIGHT LIGHT
REPLACEMENT
CAUTION
To avoid personal injury or
property damage, wear gloves
when replacing light bulb.
1. Unplug the oven or turn off power
at the main power supply.
2. Remove the bulb cover mounting
screws.
3. Replace bulb with 40 watt
appliance bulb.
4. Replace bulb cover, and mounting
screws.
5. Turn the power back on at the main
power supply.
20

OVEN LIGHT

REPLACEMENT
1. Unplug oven or turn off power at
the main power supply.
2. Open the door.
3. Remove the vent cover mounting
screws. (3 middle screws)
4. Slide the grille to the left, then pull
straight out.
5. Remove the charcoal filter, if
present.
6. Press and hold the center snap
while lifting the tab on the left
corner. Remove the cover. Remove
the bulb by turning gently.
7. Replace bulb with a 40 watt
appliance bulb.
8. Replace the bulb holder.
9. Replace the grille and 2 screws.
Turn the power back on at the main
power supply.
OPTIONAL
Filler Kits
UXA3036BDB - BLACK
UXA3036BDW - WHITE
UXA3036BDS - STAINLESS
STEEL
When replacing a 36" range hood, the
filler kit fills in the additional width to
provide a custom built-in appearance.
For installation between cabinets only;
not for end-of-cabinet installation.
Each kit contains two 3" wide filler
panels.