Lanberg SM01-WPS34 Manual page 9

MANUAL –SMART WI-FI POWER STRIP
4. Enter the password for your local Wi-Fi network. Make sure
that Smart IP camera or any other product compatible with
the "TuyaSmart" application are in close proximity to each
other. within the same network.
Note: Currently only Wi-Fi 2.4Ghz frequency is supported.
5Ghz band compatibility is not yet available.
5. Next the product will connect to the application. This
process may take a few seconds to complete. When the
connection status reaches 100%, the device will be correctly
added to "TuyaSmart".
MANUAL –SMART WI-FI POWER STRIP
9
| ENG / pl