Table of Contents
Advertisement
Available languages
Available languages
MANUAL –SMART WI-FI POWER STRIP
D.
Installation
1.
Take Lanberg Smart power strip out of the packaging.
2.
Connect the product to mains (AC). Do not connect this
power strip to another surge protector / power strip.
3.
To pair this Lanberg device with "TuyaSmart" app follow the
instructions from point H: Pairing with TuyaSmart app.
Important note:
Do not install in places with direct contact with water or liquid-
based substances. Any exposure to them may lead to serious
product damage or render the Smart power strip useless.
E.
Power
Before using Lanberg Smart power strip, connect it to the AC
power source (mains / wall-mount outlet etc.).
power is: 100-240V AC, 50-60Hz.
F.
Power strip default settings reset
ON / OFF switch found on the power strip's panel can also
be used as a Reset button. To do it press and hold it for at least
5 seconds. If the power switch starts flashing the operation was
successful.
MANUAL –SMART WI-FI POWER STRIP
4
The required
| ENG / pl
Advertisement
Chapters
Table of Contents
