Table of Contents
Advertisement
Quick Links
KA198 HDMI MATRIX 4IN4OUT 4K60HZ HDBASE-T
150M – KAMEHA
The 18Gbps 4x4 HDBaseT(150M) Matrix can connect four HDMI sources to
eight displays. It features four HDMI outputs and each HDMI output is
mirrored to provide a CAT-Cable output which runs simultaneously.
HDBaseT output can extend video transmission distance
up to 492ft / 150m via a single Cat 5e/6/7 cable and the resolution is up to
4K2K@60Hz 4:4:4. Audio de-embedded to analog and coaxial audio is
supported. Each HDMI output supports 4K2K to 1080P downscaler
independently.
The product supports IR matrix. The IR signal is one-to-one control at the
Matrix end, but the IR signal follows HDMI video channel at the HDBaseT
Receiver end.
The product provides an intuitive set of front panel with OLED screen and
supports control via front panel buttons, IR remote, RS-232, LAN, and Web
GUI.
Advertisement
Table of Contents
Related Manuals for KAMEHA KA198
Summary of Contents for KAMEHA KA198
- Page 1 KA198 HDMI MATRIX 4IN4OUT 4K60HZ HDBASE-T 150M – KAMEHA The 18Gbps 4x4 HDBaseT(150M) Matrix can connect four HDMI sources to eight displays. It features four HDMI outputs and each HDMI output is mirrored to provide a CAT-Cable output which runs simultaneously.
- Page 2 Features HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI & HDBaseT ports 4 HDMI inputs, 4 HDMI & HDBaseT mirrored outputs HDMI ports transmit 18Gbps lossless uncompressed video bandwidth Support 18Gbps lossless compressed HDBaseT signal transmission Support 4K->1080P Down Scaler for each output port HDR, HDR10, HDR10+, Dolby Vision, HLG are supported HDBaseT output can extend video transmission distance up to 492ft /...
- Page 3 Analog PCM2.0CH Balanced Audio Formats Vmax 2Vrms ＞90dB ＜0.1%（V_max） 0.001%~0.01%（V_best） THD+N Ratio ＞80dB Crosstalk Frequency Response 20Hz~20kHz ±0.5dB Human-body Model: ESD Protection ±8kV (Air-gap discharge) , ±4kV (Contact discharge) Connection Inputs:4 x HDMI Type A [19-pin female] Outputs: 4 x HDMI Type A [19-pin female] 4 ×...
- Page 4 Mechanical Housing Metal Enclosure Color Black Matrix: 440mm (W) × 200mm (D) × Dimensions 44.5mm (H) Receiver: 140mm (W) x 65mm (W) x 18mm (W) Weight Matrix: 3.1Kg, Receiver: 155g Power Supply AC 100 - 240V 50/60Hz Power Consumption 60W (Max) Operating 0°C ~ 40°C / 32°F ~ 104°F Temperature...
- Page 5 The LED will illuminate in green when the product is Power LED working normally, and red when the product is on standby. You need to press an output button (1~4) firstly OUTPUT / and then press an input button (1~4) to select the INPUT corresponding input source for the output port.
- Page 6 Rear Panel Name Function Description IR IN Connect to IR receiver cable, the IR receive signal (1/2/3/4/ will emit to the “IR OUT” port of the HDBaseT Receiver. ALL) ports IR OUT Connect to IR blaster cable, the IR emit signal is (1/2/3/4/ from the “IR IN”...
- Page 7 HDBaseT Receiver Panel Name Function Description 1 Power LED Red LED will be on when the receiver is powered on. 2 SERVICE Firmware update port. port DC 24V/1A power supply input port. Note: The Matrix supports POC function, it means 3 DC 24V that either transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need...
- Page 8 Connect to a PC or control system with a 3-pin 11 RS-232 phoenix connector cable to transmit command between the Matrix and HDBaseT Receiver. Application Example...
Need help?
Do you have a question about the KA198 and is the answer not in the manual?
Questions and answers