Advertisement
E L E C T R I C V E H I C L E I N F O R M A T I O N
S TA R TIN G A N D S TO PPIN G
T HE E L EC T RI C M OTO R
To start your electric motor in the vehicle,
a valid remote control must be inside
your vehicle to switch the power on and
start your vehicle.
1. Be sure the vehicle is in park (P).
2. Press the brake pedal.
Start Stop
3. Press the
button.
NOTE:
You will not hear any motor noise.
4. The
light illuminates.
READY
To stop the electric motor when your
vehicle is not moving and the electric
motor is on or in the accessory mode,
press and release the
Start Stop
without pressing the brake pedal. This
shuts off the electric motor and all
electrical accessories.
To stop the electric motor when your
Start Stop
vehicle is moving, press the
button three times within two seconds,
or press and hold for at least one second.
Shift into neutral (N) and use the brakes
to bring your vehicle to a safe stop. When
your vehicle comes to a complete stop,
shift into park (P).
W H AT IS T H E HI G H
VO LTAG E BAT T E RY?
The high voltage battery stores electrified
button
power used by the electric motor to
propel the vehicle.
PE D E S T RIA N A L E R T
SYS T E M
Due to the quiet operation of hybrid
and electric vehicles at low speeds, the
system creates a subtle sound to alert
pedestrians. The system is on when
your vehicle is running and not in park
(P). Some sound may be audible in the
passenger compartment.
*I F E Q U I P P E D
15
Advertisement
