External Audio Connections - Maxent MX-42HPM20 Owner's Manual

Display Connections
Connecting a Set-Top Box (con't)
Using HDMI Input
Connect the HDMI connector from the back of
the HDTV Set-Top Box to the HDMI Connector
located on the back of the monitor.
Notes:
Some HDTV Set-Top Boxes may not have a HDMI output. Use Component Video input or RGB input
method if this is the case.
Upon connecting your HDTV Set-Top Box to the HDMI input of the monitor, it may be necessary to
adjust various picture settings on the monitor to correctly match the output of the HDTV Set-Top Box.
This is caused by the different video timings set by various HDTV Set-Top Box manufacturers.

External Audio Connections

Connecting to an External Amplifiers
This monitor can be connected to an external
amplifier using the AUDIO OUT jacks located
on the back of the monitor.
Connect the red (R) and white (L) AUDIO OUT
jacks from right side of the connector panel to
the external amplifier.
Note:
The AUDIO OUT RCA jacks can be set to
either Fixed or Variable audio output levels.
18
-
HDMI Cable
HDMI
-