Assembling The Loudspeakers; General Information; Unpacking - T+A SOLITAIRE S 430 User Manual

Assembling the loudspeakers

General information

Carefully unpack the loudspeakers and store the original packing material carefully. The
carton and packing are specially designed for this loudspeaker and will be needed again
if you wish to move the equipment at any time. If you have to transport the loudspeaker,
it must always be carried or sent in its original packaging in order to prevent damage
and defects.
If the loudspeaker gets very cold (e. g. when being transported), condensation may form
inside it. Please do not switch it on until it has had plenty of time to warm up to room
temperature, so that any condensation evaporates completely.
To avoid damage, when setting up very heavy loudspeakers, please ask a friend to help you!


Unpacking

• To unpack, place the cardboard box in an upright position.
• Open the cardboard box vertically, as illustrated below, and remove the protective
cardboard corners.
• Then carefully pull the speaker out of the cardboard box while standing upright.
• Place the speaker, including the foam moldings, on one of its sides. Place a carpet or
a soft blanket underneath for protection.
• Now, remove the upper and lower foam parts (X).
25