Toro 144-0379 Installation Instructions Manual page 4

4. Install the rear, center baffle using 2 carriage
bolts (3/8 x 7/8 inch) and 2 locknuts (3/8 inch)
as shown in Figure
Note:
This baffle installs between the front,
outer baffle flanges
Note:
Where the front, outer baffles, the rear,
outer baffles, and the rear, center baffle come
together, install 2 carriage bolts (3/8 x 7/8 inch)
and 2 locknuts (3/8 inch) as shown in
Figure 3
1. Carriage bolt (3/8 x 7/8
inch)
2. Rear, center baffle
3.
(Figure 3).
Figure
3. Front baffle flange
4. Locknut (3/8 inch)
5. Tighten all the hardware.
6. Install the correct kicker baffle to each chamber
using 1 carriage bolt (3/8 x 7/8 inch) and 1 flange
nut (3/8 inch) as shown in
Note:
The hooked end of each kicker baffle
attaches to the slot in the chamber baffle
4).
Note:
You may need to loosen the mating baffle
3.
to allow the hooked end of the kicker baffle to
fit correctly.
g021731
1. Slot
4
Figure 1.
Figure 4
2. Hooked end
(Figure
g021732