Impax IM-MMA130-IWK Manual page 21

UNPACKING
Caution! This packaging contains sharp objects.
Take care when unpacking. Remove the
machine, together with the accessories
supplied, from the packaging. Check carefully to
ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete. If any parts are found to be
missing, the machine and its accessories should
MMA ASSEMBLY
WARNING
ELECTRIC SHOCK can kill.
Keep the electrode holder and
cable insulation in good
condition.
Do not touch electrically live parts or
electrode with skin or wet clothing.
Insulate yourself from work and ground.
Turn the input line switch on the welder
"OFF" before connecting or disconnecting
Fig 1
Electrode
Holder
be returned together in their original packaging
to the retailer.
Do not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper
means. Do not let children play with empty
plastic bags due to the risk of suffocation.
output cables or other equipment. IP21S
enclosure protection grade, please do not
operate it in rain.
Fitting The Earth Clamp & Electrode Holder
Insert the plug on the end of the earth clamp
lead into the negative (-) socket (Fig.1) and twist
in a clockwise direction to secure into position.
The plug on the end of the electrode holder can
be fitted into the positive (+) socket (Fig.1) in the
same way.
A
VRD
TIG
MMA
A
1
10
20
Earth Clamp