Transport And Frost Protection - Bosch WTH852S8SN Installation And Operating Instructions Manual

Transport and frost protection

Empty the condensate container.
1.
Select any programme using
2.
the programme selector.
Press the Start button.
3.
Wait for 5 minutes.
4.
The condensation is drained.
Note:
Empty the condensate container
5.
again.
Switch off the dryer.
6.
Despite draining, there will
Note:
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
Installation and connection
en
15