Table of Contents
Advertisement
14.2 Filling the water tank
Your appliance removes the creases
from rarely worn clothing using cold
drinking water. If the display shows a
notification while the appliance is in
operation, fill the water tank.
ATTENTION!
Operating the appliance with water
that is dirty or too hot may result in
damage to the appliance.
Only fill the water tank with cold
▶
drinking water.
Never use condensed water, dis-
▶
tilled water, additives or descaler
for the crease-removal function.
Requirements
¡ You have started a programme
with the crease-removal function.
→ "Starting a programme with the
crease-removal function", Page 32
¡ The display shows:
¡ The condensation container
→ Page 31 is removed from the
appliance.
.
Add approx. 180 ml cold drinking
1.
water through the front opening,
using the water jug provided.
Check the water tank filter regu-
larly and clean the filter if it is dirty.
→ "Cleaning the water tank filter",
Page 46
If
does not go out on the dis-
play, add cold drinking water
through the front opening and
align the appliance correctly.
→ "Aligning the appliance",
Page 16
goes out on the display.
a
Insert the condensation container.
2.
→ "Inserting the condensation con-
tainer", Page 31
Start the programme.
3.
→ "Starting a programme with the
crease-removal function", Page 32
Home Connect
15 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
Home Connect en
33
Advertisement
Table of Contents
