Crease-Removal Function; Starting A Programme With The Crease-Removal Function; Filling The Water Tank - Bosch WTX8HEL9SN User Manual And Installation Instructions

en Crease-removal function
with a crease-removal function for
any laundry that has not been worn
for long.
14.1 Starting a programme
with the crease-removal
function
Note
Wash items of laundry that have
traces of sweat, perfume or deodor-
ant before wearing them again.
Do not use dryer cleaning sets.
Do not use a programme with the
crease-removal function for the
following fabrics:
¡ Wool, leather and viscose
¡ Fabrics with parts made from
metal, wood or plastic
¡ Waxed jackets and oilskin jackets
Requirements
¡ The laundry is prepared.
→ "Preparing the laundry", Page 35
¡ The laundry is sorted.
¡ The laundry is placed in the appli-
ance.
→ "Loading laundry", Page 36
Set a programme with crease-re-
1.
moval function.
→ "Timed programmes", Page 32
Start the programme.
2.
→ "Starting the programme",
Page 36
If the water tank is empty, the dis-
play shows: "Refresher-container
is empty, please re-fill. " .
→ "Filling the water tank",
Page 40
The average programme duration
of the crease-removal function is
approx. 45 minutes and may be
longer or shorter depending on the
ambient temperature.
a After the programme has ended,
the display shows: "Finished, re-
move washing " .
40
Remove the laundry.
3.
→ "Unloading the laundry",
Page 36
The results of the crease-removal
function may vary depending on
the type of fabric, the amount of
laundry and the selected pro-
gramme.
Remove the laundry immediately
after the programme has ended to
prevent creasing.
Hang up the items of laundry and
4.
pull them into shape.
14.2 Filling the water tank
Your appliance removes the creases
from rarely worn clothing using cold
drinking water. If the display shows a
notification while the appliance is in
operation, fill the water tank.
ATTENTION!
Operating the appliance with water
that is dirty or too hot may result in
damage to the appliance.
Only fill the water tank with cold
▶
drinking water.
Never use condensed water, dis-
▶
tilled water, additives or descaler
for the crease-removal function.
Requirements
¡ You have started a programme
with the crease-removal function.
→ "Starting a programme with the

crease-removal function",

Page 40
¡ The display shows: "Refresher-
container is empty, please re-fill. " .
¡ The condensation container
→ Page 38 is removed from the
appliance.