Connecting The Appliance - Siemens WM14SA8DN User Manual And Assembly Instructions

Connecting the appliance

Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Connect the water inlet hose.
1.
1
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
2
¾˝
min.
10 mm
min.
17 mm
Installation and connection en
When connecting to a 21 mm = ½"
3.
tap, first fit the adapter with a seal-
ing washer.
Open the water tap carefully and
4.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Drainage into a si-
phon.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
"elbow" → Page 33.
17