SETTINGS - PROGRAMMES
AUTOMATICALLY SETTING UP PROGRAMME
Press
>
Automatically tunes the programmes.
1.
Select Country where the TV is used. Programme settings change
depending on the country you choose.
2.
Initiate Auto Tuning.
3.
Set Auto Tuning following screen instructions.
-
If Input Source is not connected properly, programme registration may
not work.
-
Auto Tuning only finds programmes that are currently broadcasting.
-
If Safety is turned on, a pop-up window will appear asking for password.
MANUAL PROGRAMME TUNING
Press
>
Settings) > Manual Tuning
This function is for manually searching and saving programmes.
- For digital broadcasting, signal strength and signal quality can be checked.
USE THE SIGNAL TEST
Press
>
Settings) > Signal Test
-
Shows the MUX and Service information etc.
-
Signal test is only available in Antenna or Cable mode.
-
Some models may not be supported.
72
> Programmes > Programme Tuning > Auto Tuning
> Programmes > Programme Tuning > (Programme Tuning &
> Programmes > Programme Tuning > (Programme Tuning &