Table of Contents
Advertisement
SETTINGS - PICTURE (Cont.)
PICTURE MODE SETTINGS
Fine-Tuning Picture Mode
Press
>
-
This feature allows you to adjust the selected picture mode in detail.
Backlight -
Contrast -
Adjusts the contrast of the bright and dark areas of the picture. The
closer to 100, the higher the contrast.
Brightness -
Adjusts the overall screen brightness. The closer to 100, the brighter
the screen.
-
You may use the Brightness settings particularly to set the dark part of
the image.
Sharpness -
Adjusts the sharpness of the image. The closer to 50, the sharper
and clearer the image.
Colour -
Tones down or up the colours displayed on the screen. The closer to
100, the deeper the colour.
Tint -
Adjusts the colour balance between red and green displayed on the screen.
The closer to Red 50, the more red the colour will be. The closer to Green 50, the
more green the colour will be.
Colour Temperature -
the level, you get a warmer tone, and as you raise it, you get a cooler tone.
-
The settings you specify only apply to the currently selected input mode.
-
To apply your current picture settings to all input modes, select Apply to
all inputs.
-
Depending on the input signal or the selected picture mode, the
available options may differ.
-
The configurable items differ depending on model.
Resetting Picture Mode
Press
>
If you want to reset the image settings to the factory defaults after configuring
the image settings, select reset for each image mode.
> Picture > Picture Mode Settings
Controls the level of screen brightness by adjusting the
backlight. The closer to 100, the brighter the screen.
-
Decrease the Backlight to reduce energy consumption.
-
If the Energy Saving is set to Maximum, you cannot
adjust the Backlight.
-
In this case, navigate to
Energy Saving and set to Off or Minimum.
Adjusts the colour tone of the entire image. As you lower
> Picture > Picture Mode Settings > Reset
>
> Picture >
61
Advertisement
Table of Contents
