Memory Function - Midea TM162A2GE-P Instruction Manual

8.Auto Menu
(1) In waiting state, press "Popcorn", "Dinner Plate", "Pizza Reheat", "Frozen Entree",
"Beverage", "Soup", "Fresh Vegetable" ,"Frozen Vegetable" or "Potato" to choose the
auto menu.
(2) Press the same pad repeatedly to choose the weight of the food.
(3) Press "
START/Enter/Add 30 Sec
9.Sensor Cook
(1) In waiting state, press "Dinner Plate", "Fresh Vegetable" or "Frozen Vegetable",
the screen will display "SC".
(2) Press " START/Enter/Add 30 Sec
display.
(3) The sensor will sound once when the steaming is emanated.The surplus time will
display.

10. MEMORY FUNCTION

(1) Press "Favorite " to choose memory 1-3 procedure. The screen will display 1,2,3.
(2) If the procedure has been set, press "
continue to set the procedure. Only one or two stages can be set.
(3)If the procedure has not been set, after finishing the setting, press "Favorite " once to
save the procedure and turn back to the waiting states. If press
START/Enter/Add 30 Sec.
"
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "Favorite " twice, stop pressing until the screen displays "2".
b. Press "COOK TIME " once,then press "3","2","0" in order.
c. Press "
POWER LEVEL
d. Press "Favorite " to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "
saved
as the
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. When you want to run the saved procedure, in waiting states, press "Favorite " twice,
screen displays "2", then press "
Note: Defrosting and Auto menu can not be set in memory function.
" it will start cooking at once and save the procedure too.
" once,"PL10" display,then press "8" and "PL8" displays.
START/Enter/Add 30 Sec.
memory 2 and operated.
" to start cooking.
" to start sensor
START/Enter/Add 30 Sec.
START/Enter/Add 30 Sec.
13
cooking. " SC will flash in the "
" to use it. If not,
" again, the procedure will be
" to start cooking