Table of Contents
Advertisement
Available languages
Available languages
INSTRUCTION MANUAL
•
Please read the instruction manual carefully
and keep it for future use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electrical shock, burns
and other injury, including the following:
1. Study this instruction manual carefully before
using the product.
2. The device is only intended for private and not
for any commercial use.
3. Remove the unit from its packaging and check
to make sure it is in good condition before
using.
4. Do not let children play with parts of the
packing (such as plastic bags).
5. Check the household voltage to ensure it
matches the fan's rated specification.
6. Check the power cord and plug carefully
before use to make sure that they are not
damaged.
7. Before unplugging the power cord, be sure to
turn off the power. When touching the unit,
be sure your hands are dry to prevent from
electric shock.
8. Do not run the cord under carpeting. Do not
cover cord with throw rugs,runners or the like.
Arrange cord away from traffic area and where
it will not be tripped over.
9. Do not use a soft surface, like a bed, where
openings may become blocked.
10. Avoid the use of an extension cord because
the extension cord may overheat and cause a
risk of fire.
11. Do not use outdoors.
12. Avoid contact with moving parts. Keep hands,
hair, clothing, spatulas and other utensils away
during operation to reduce the risk of injury to
persons and/or damage to the machine.
13. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
14. Children should be supervised to ensure that
they do not play with the appliance.
CAUTIONS
•
This appliance is not a toy.
•
To avoid the risk of fire or electric shock do not
remove the housing by yourself.
•
Any servicing other than cleaning and user
maintenance should be performed by an
authorized service representative.
•
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its service
agent.
•
Repair should be done by an authorized
service personal only.
•
To reduce the risk of electric shock, do not
immerse or expose the product, flexible cord
or plug to rain, moisture or any liquid.
•
Do not operate the appliance with wet hands,
in order to avoid damage.
•
Do not use the appliance near explosive and
combustible gas.
•
Do no turnover the appliance. Unplug the
power supply If it is toppled over and there
have some water in the body. Dry the body
before use.
•
Do not knock or shake the body when use,
otherwise it may cause stop.
•
The appliance must not located immediately
below a socket outlet.
•
The rating current of socket should exceed
10 A.
•
Do not use the appliance in the immediate
surrounding of a bath, a show or a swimming
pool.
•
Don't keep the device in the watery
environment;
•
Keep the device away the place of high
temperature, ray and wetly.
•
Please turn off the power supply in the watery
environment.
•
In the event where the appliance is dropped
into the water, turn off the power at the power
outlet and remove the plug immediately. DO
NOT REACH INTO THE WATER TO RETRIEVE IT.
•
It is important to note that the appliance will
have to be inspected by a qualified technician
before using it again.
2
FUNCTIONS & OPERATION
Plug in first
Push the ON/OFF
button to start and stop the
fan.
•
SPEED button
: Push to select speed of: Low
- Middle
– High
•
TIMER button
: Push it to select the timers
from 1 hours to 7 hours, it will show on the
display panel.
•
SWING button
: Push the button to
oscillate the fan, push it again to stop the
function.
•
Negative ion function
: Push the button to
start or stop.
All the buttons are on the control panel: (fig. A)
REMOTE CONTROL
•
To use the remote control, first remove the
plastic spacer between the battery and the
terminal.
•
Ensure that there are no objects between the
remote control and the heater.
•
If the remote control still exhibits problems,
minimise any ambient light sources that may
interfere with the operation of the Infrared
signal.
•
If the remote control stops working properly,
replace the battery with a similar "CR2025"
button cell, ensuring that the polarity is
correct
Push the button
to start the fan
Push the button
to select fan speed of Low-
Middle –High
Push the button
to oscillate the fan, push it
again to stop the function
Push the button
to select the timers from
1 hours to 7 hours.
Push the button
to select the negative ion
function.
ASSEMBLING
(fig. B)
Step 1: Aiming the assemble poles with the
corresponding holes, and insert the poles into the
holes.
Step 2: Aiming the assembled base to screw poles
of the fan body
Step 3: After well connect of the body and base,
screw into the screw holes of the base. And put
the power cord into the slot of the base.
Step 4: Put the fan flatly
THE USAGE OF FRAGRANCE BOX
In the front of the fan, there is a small box below
the vent. There is a sponge inside the fragrance
box. Take out the box and put some fragrance on
the sponge if you would like the wind blow with
fragrance.
CLEANING AND MAINTENANCE
Clean with neutral detergent and soft cloth.
Attention: unplug the power plug when clean the
appliance ,since there have high pressure in the
body. Do not leave any water on the control panel.
Do mot use benzine, thinner or other solvents.
If there is something wrong with the equipment,
do not use it any more and wend for the technical
personnel for repairing.
ACCESSORY
Screws for assemble the base; remote control
TECHNICAL CHARACTERISTICS
220-240 V • 50 Hz • 60 W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipment to an appropriate waste
disposal center.
3
Advertisement
Table of Contents
