Table of Contents
Advertisement
en Basic operation
8 Basic operation
8.1 Placing the burner parts
You can find out how to correctly position the burner
parts here.
Ensure that the burner parts are clean and dry.
1.
Ensure that the individual parts of the burners are fit-
2.
ted in their exact position and are straight; other-
wise, this may result in ignition problems or prob-
lems during operation.
Install the burner head so that the thermocouple
3.
and spark plug are located in the corresponding
slots of the burner head.
8
Place cookware onto the
pan supports. Never
place cookware directly
on the burner. Before us-
ing the appliance, ensure
that the pan supports and
gas burner caps are posi-
tioned correctly.
!
!
The catching pin on the outer ring cap must fit into
4.
the corresponding slot on the burner head.
The catching pin on the inner ring cap must fit into
5.
the corresponding slot on the burner head.
8.2 Using suitable cookware
Only use cookware with a suitable diameter.
1.
Ensure that the cookware does not protrude over
2.
the edge of the cooktop.
Handle the cookware that
is on the hob carefully.
Do not bang on the hob.
Do not place heavy
weights on the hob.
Advertisement
Table of Contents
