AXIS M32 Dome Camera Series
Configure your device
1. Go to Video > Installation > Image correction.
2. Turn on Straighten image.
3. Use the controls to adjust the image.
View and record video
This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 54.
Reduce bandwidth and storage
Important
Reducing the bandwidth can result in loss of details in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > H.264 and H.265 encoding and do one or more of the following:
-
Select the Zipstream level that you want to use.
Note
The Zipstream settings are used for both H.264 and H.265.
-
Turn on Dynamic FPS.
-
Turn on Dynamic GOP and set a high Upper limit GOP length value.
Note
Most web browsers don't support H.265 decoding and because of this the device doesn't support it in its web interface.
Instead you can use a video management system or application that supports H.265 decoding.
The illustration shows before and after an image has been straightened.
in the live view.
11