English - KDS EA760A-24 Instructions Manual

18-1 English
Safety Notes
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
▶ Have the measuring tool repaired
only through qualified special-
ists using original spare parts.
This ensures that the safety of the
measuring tool is maintained.
▶ Do not operate the measuring
tool in explosive environments,
such as in the presence of flam-
mable liquids, gases or dusts.
Sparks can be created in the
measuring tool which may ignite
the dust or fumes.
▶ For technological reasons, the
measuring tool cannot ensure
100 % certainty. To rule out haz-
ards, safeguard yourself each
time before drilling, sawing or
routing in walls, ceilings or floors
by means of other information
sources, such as building plans,
pictures from the construction
phase, etc. Environmental influenc-
es, such as humidity or closeness
to electrical devices, can influence
the accuracy of the measuring
tool. Surface quality and condition
of the walls (e.g., moisture, metallic
building materials, conductive wall-
paper, insulation materials, tiles) as
well as the amount, type, size and
position of the objects can lead to
faulty measuring results.
Functional Description
Please unfold the fold-out page with
the representation of the measuring
tool and leave it unfolded while
reading the operating instructions.
Intended Use
The measuring tool is intended for
the detection of metals (ferrous and
non-ferrous metals, e.g., rebar), joists
and " live" wires/conductors in walls,
ceilings and floors.
Product Features
T h e n u m b e r i n g o f t h e p r o d u c t
f e a t u r e s s h o w n r e f e r s t o t h e
illustration of the measuring tool on
the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4
Operating-mode indication
5 On/Off button
6 Display-illumination button
7 Audio signal button
8 B u t t o n f o r d e t e c t i n g " l i v e "
c o n d u c t o r s / O p e r a t i n g m o d e
"Power cable"
9
B u t t o n f o r m e t a l d e t e c t i o n /
Operating mode "Metal"
10 Button for detecting wood and
metal beams/Operating mode
"Drywall"
11 Contact pads
12 Sensor area
13
Type plate
14 Battery lid
15 Latch of battery lid
16 Fixture for carrying strap
46