Ford SIMTAP Operating Instructions

SIMTAP
Ford
SIMTAP
Drilling Machine
Operating Instructions
WARRANTY - READ BEFORE OPERATING
All merchandise is warranted to be free from defects in material
and factory workmanship. We will provide free of charge
new products in equal quantities for any that prove defective
within one year from the date of shipment from our factory.
Manufacturer should not be liable for any loss, damage, or
injury, direct or consequential, arising out of the use of or
the inability to use the product. Before using, user shall
determine the suitability of the product for his intended
use and user assumes all risk and liability whatever in
connection therewith. No claims for labor or consequential
damage will be allowed. The foregoing may not be changed
except by agreement signed by an officer of the manufacturer.
DAMAGE CAUSED BY IMPROPER TOOLS OR
HANDLING WILL VOID OUR WARRANTY
Refer to the FMB website (http://www.fordmeterbox.com) for additional and most
recent instructions and product information.
THE FORD METER BOX COMPANY, INC.
P.O. Box 443, Wabash, Indiana, USA 46992-0443
Phone: 260-563-3171 • FAX: 800-826-3487 • Overseas FAX: 260-563-0167
http://www.fordmeterbox.com
#020469
TM
TM
SIMTAP
Drilling Machine
Operating Instructions
8/11
TM