Advertisement
Installation Steps, Continued
Assemble Cab-Mate Flex
STEP TWO
Detach the ball mount from the back of the cradle by removing the four screws that secure it. It
may be easier to remove the mount by detaching the ball mount section. The ball mount section
will be used in the assembly of the new device.
Cradle/LMU
STEP THREE
Assemble the new Cab-Mate Flex LMU and cradle. Lay the LMU assembly over the back of the
cradle and line up the four screw holes. Add the ball mount on top, lining up the 4 holes inthe ball
mount and fasten all three pieces together with provided screws.
PedigreeTechnologies.com | Support: (701)-499-0022
+
4
Cab-Mate One to Cab-Mate Flex
Ball Mount
+
Advertisement
