Subscribe to Our Youtube Channel
Related Manuals for austriamicrosystems AS1351
Summary of Contents for austriamicrosystems AS1351
- Page 1 AS1351 Programming Board Application Note AS1351 Programming Board Application Note www.austriamicrosystems.com Revision 1.00 1 - 4...
- Page 2 Blinks if an already programmed IC was placed in the socket. If ON after programming sequence, error the programming of the IC failed. An AS1351 can be placed here, either Socket to be programmed or to be evaluated. Input/Output Description Figure 2: Board description...
- Page 3 Turn the programming board ON. (On/Off switch “A” set to ON.) The yellow LED “F” should be on now. Perform measurements at the outputs. “K-N” Note: Due to influences of the socket the full performance of the regulators can be slightly lower. The AS1351 can be programmed to an output voltage only once (One-Time-Programming OTP function).
- Page 4 Turn the board OFF (On/Off switch “A” set to OFF). Open the socket and remove the fully programmed AS1351. Note: If an already programmed AS1351 is entered and the START button is pressed, the green LED starts to blink. A new programming is not performed.
- Page 5 Authorized Distribution Brand： Website： Welcome to visit www.ameya360.com Contact Us： Address： 401 Building No.5, JiuGe Business Center, Lane 2301, Yishan Rd Minhang District, Shanghai , China Sales： Direct +86 (21) 6401-6692 Email amall@ameya360.com 800077892 Skype ameyasales1 ameyasales2 Customer Service： Email service@ameya360.com Partnership：...
Need help?
Do you have a question about the AS1351 and is the answer not in the manual?
Questions and answers