Panasonic WX-ST200 Operating Instructions Manual page 20

Pairing
2
Set the wireless receiver / extension receiver to pairing mode
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green, then press for at least two seconds the [REG] button of the channel to
which you want to pair a microphone.
When the wireless receiver / extension receiver is in pairing mode, the [REG] indicator
of the channel whose [REG] button has been pressed will blink orange. Pairing mode
lasts for 30 seconds, so pair the microphone within this time.
Power indicator
20
Register indicator
Register button
* This illustration shows the WX-SR202P.