AOC L19BH83 Service Manual page 12

19"&22"LCD TV
DIGITAL SET TOP BOX
Connect the top box to the input port of the component signal.
How to connect
1. Connect 3 separate component signal cables to the Y, Pb and Pr ports of the component signal of the Digital
TV/ Top Box, and the Y, Pb and Pr ports of the component signal of theTV set.
2. Connect the audio cable with the audio port of the Digital TV/Top Box and the audio port of the TV set.
How to use
1. Select Component.
2. Turn on the DVD set-Top box set.
Warning: In case you notice scrolling images, wrong colors or no color, no picture or even combinations of these,
on your screen, check if the connections are done in the right way. Check if the cable colors match with the Input
connector colors.
PC
How to connect the TV set to your computer
Use D-sub signal cable (also called VGA cable) enclosed in the carton to connect the D-sub interface of the TV set
and your computer, now the TV set is used as a monitor and you need to switch the source to PC mode. Please see
the below picture for your reference.
How to connect audio cable
Use the audio cable enclosed in the carton to connect the PC audio output terminal to TV set audio input terminal.
Please see the below picture for your reference.
12
AOC L19BH83&L22BH83