Related Manuals for Federal Signal Corporation I-IPTEL1
Summary of Contents for Federal Signal Corporation I-IPTEL1
- Page 1 IP Phone for Intelligent Systems Model: I-IPTEL1 Description, Installation, and Configuration Manual 25500823 Rev. A0 1122 Printed in U.S.A. © Copyright 2022 Federal Signal Corporation...
- Page 2 A copy of this limited warranty can also be obtained by written request to Federal Signal Corporation, 2645 Federal Signal Drive, University Park, IL 60484, email to info@fedsig.com or call +1 708-534-3400.
-
Page 3: Table Of Contents
Contents Safety Messages.....................4 General Description ..................4 Features ....................5 Applications....................6 Overview ....................7 Unpacking the Device ..................7 Specifications ....................8 Introduction of the Keypad ................9 Connecting the IP Phone ................12 Configuring the Network Interface ..............13 Configuring Static Setting ...............16 Configuring DHCP Setting ..............16 Configuring PPPoE Setting ..............17 Configuring SIP Settings .................17 Making a Live Public Address Announcement ..........18... -
Page 4: Safety Messages
(part number 25500824). See fedsig.com for online manuals. General Description The IP Phone for Intelligent Systems (I-IPTEL1) is a high-quality IP phone that supports VoIP, Intercom, SIP, and preset buttons for alert notification. Include the IP phone on an existing SIP phone system, or use the phone and speaker as an isolated flat IP network. -
Page 5: Features
The Informer IP Speaker can be networked later for additional functionality. Features The I-IPTEL1 has the following features. • Over 60 programmable buttons • Phone-to-phone dialing without SIP Server • Phone-to-speaker for live PA •... -
Page 6: Applications
General Description • Ability to synchronize with Network Time Protocol (NTP) clock Applications The I-IPTEL1 has the following applications. • Indoor and outdoor locations • Muster or call stations • Campuses or school alerting • Use with video security systems •... -
Page 7: Overview
Unpacking the Device Overview Use the IP Phone with the Federal Signal line of IP-based speakers. The Federal Signal Informer series IP products incorporate industry-standard Web, SIP phone, and Modbus ® PLC interfaces to simplify integration with existing systems. Each Informer device has its own Installation Manual. -
Page 8: Specifications
Desktop Stand (Angles 1): 9.4 x 7.8 x 7.3 inches (239 x 199.3 x 185.8 mm) Desktop Stand (Angles 2): 9.4 x 7.4 x 7.7 inches (239 x 188.5 x 195.6 mm) IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com... -
Page 9: Introduction Of The Keypad
Introduction of the Keypad Introduction of the Keypad The following figure illustrates the front view and the keypad of the IP Phone, and the table describes the keys. Figure 1 Keypad of IP Phone Description, Installation, and Configuration Manual Federal Signal www.fedsig.com... -
Page 10: Table 3 Keypad Description
Redial Press the Redial key to redial the last number dialed. Hands-free Press the Hands-free key to open the audio channel of the speakerphone. Next Page Scrolls through multiple screens. IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com... - Page 11 Introduction of the Keypad Interface Description DSS KEY Short press a DSS key to select a function. Long press a DSS key to display the settings interface. (To long press, press and hold the button for more than 2 seconds.) Volume In the standby state (on-hook), press this button Down Key...
-
Page 12: Connecting The Ip Phone
USB Port USB device connection Power Port Power adapter connection Network Port LAN or Internet connection PC Port Network port for computer connection Headset Port Headset connection Handset Port Handset connection IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com... -
Page 13: Configuring The Network Interface
Configuring the Network Interface Figure 3 Typical IP Phone Setup Configuring the Network Interface To configure the network interface through the web browser: 1. Before installing the IP Phone on an IP network, connect your PC to the IP Phone via the PC port using the Ethernet cable provided. - Page 14 IP Phone into your web browser to view the web page of the device. 4. The login window appears. 5. Enter the Username: admin 6. Enter the Password: fedsig NOTE: The password is case sensitive. IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com...
- Page 15 Configuring the Network Interface 7. Click Login. The System > Information screen appears. Description, Installation, and Configuration Manual Federal Signal www.fedsig.com...
-
Page 16: Configuring Static Setting
IPv4 Settings, click the Static IP option button. Configuring DHCP Setting To configure for DHCP setting, on the Network > Basic dialog box under IPv4 Settings, click the DHCP option button. IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com... -
Page 17: Configuring Pppoe Setting
Configuring the Network Interface Configuring PPPoE Setting To configure for PPPoE setting, on the Network > Basic dialog box under IPv4 Settings, click the PPPoE option button. Configuring SIP Settings To configure for SIP setting, select Line > SIP. Type in the following fields. Username, Display name, Realm, Activate, Authentication User, Authentication Password, Server Name, Server Address, Server Port, Transport Protocol, Registration Expiration. -
Page 18: Making A Live Public Address Announcement
Making a Live Public Address Announcement Making a Live Public Address Announcement To make a live PA announcement: 1. Lift the handset. 2. Press one of the DSS keys. 3. Speak into the handset. IP Phone for Intelligent Systems (I-IPTEL1) Federal Signal www.fedsig.com... -
Page 19: Getting Service
Getting Service Getting Service If you are experiencing any difficulties, contact Federal Signal Customer Support at 800-548-7229 or 708-534-3400 extension 7511 or Technical Support at 800-524-3021 or 708-534-3400 extension 7329 or e-mail at techsupport@fedsig.com. For instruction manuals and information on related products, visit http://www.fedsig.com. - Page 20 2645 Federal Signal Drive University Park, Illinois 60484 www.fedsig.com Customer Support 800-548-7229 • +1 708 534-3400 Technical Support 800-524-3021 • +1 708 534-3400 All product names or trademarks are properties of their respective owners.
Need help?
Do you have a question about the I-IPTEL1 and is the answer not in the manual?
Questions and answers