Download Print this page

Safavieh Outdoor Garnen PAT7714 Quick Start Manual

Advertisement

Quick Links

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE
DESCRIPTION
1
RIGHT FRAME
2
LEFT FRAME
3
BACK CHAIR
4
SEAT CHAIR
5
BACK BENCH
6
SEAT BENCH
7
LEG TABLE
8
SUPPORT BAR
9
TOP TABLE FRAME
10
BACK CHAIR CUSHION
11
SEAT CHAIR CUSHION
12
SEAT BENCH CUSHION
13
TABLE GLASS
A
BOLT M6 x 60 MM
B
BOLT M6 x 40 MM
C
BOLT M6 x 15 MM
D
FLAT WASHER
E
ALLEN KEY
Model# PAT7714
PICTURE
QUANTITY
Product Dimension:
3 X
41,34"x19,69"x16,34" (TABLE)
3 X
42,91"x26,57"x30,71" (BENCH)
23,23"x26,57"x30,71" (CHAIR)
2 X
2 X
1 X
1 X
2 X
1 X
1 X
4 X
2 X
1 X
1 X
6 X
26 X
4 X
36 X
2 X
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
1-5

Advertisement

loading

Summary of Contents for Safavieh Outdoor Garnen PAT7714

  • Page 1 CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Weight Capacity : 275 Ibs (single seat) * Please make sure that you have all parts indicated before you begin assembly of this item...
  • Page 2 STEP 1: Connect Right Frame (1) & Seat Chair (4), tighten Allen Bolt STEP 2: Connect Back Chair (3) & The Part from Step (1), tighten (B), Flat Washer(D) with Allen Key (E). Allen Bolt (B), Flat Washer(D) with Allen Key (E). STEP 3: Connect The Part from Step (2) &...
  • Page 3 STEP 5: Put Back Chair Cushion (10) and Seat Chair Cushion (11) to STEP 6: FINISH CHAIR finish Chair. STEP 7: Connect Right Frame (1) & Seat Bench (6), tighten Allen Bolt STEP 8: Connect The Part from Step (7) & Back Frame (5), tighten (B), Flat Washer (D) with Allen key (E).
  • Page 4 STEP 9: Connect The Part from Step (8) & Left Frame (2), tighten Allen STEP 10: Connect The Back Bench (5) & Left Frame (2), Right Frame Bolt (B), Flat Washer (D) with Allen Key (E). (1) with tighten Allen Bolt (A) Flat Washer (D) with Allen Key (E). STEP 12: Finish Chair STEP 11: Put Back Chair Cushion (10) and Seat Chair Cushion (12) to finish Bench.
  • Page 5 STEP 13: Connect Leg Table (7) & Top Table Frame (9), tighten STEP 14: Connect Support Bar (8) & The Part from Step (13), tighten Allen Bolt (B),Flat Washer(D) with Allen Key (E). Allen Bolt (C),Flat Washer(D) with Allen Key (E). STEP 15: Connect The Part from Step (14) &...

This manual is also suitable for:

Garnen pat7714bGarnen pat7714cPat7714dGarnen pat7714a