Page 1
* This item should be assembled on a soft surface to prevent scratching the finish during assembly * This item may require periodic tightening Warning : Do not stand on bench Warning : Do not over torque bolts/screws Part List and Hardware List Model# PAT7713 PIECE DESCRIPTION PICTURE QUANTITY...
Page 2
STEP 1: Connect Right Frame (1) & Seat Chair (4), tighten Allen Bolt STEP 2: Connect Back Chair (3) & The Part from Step 1, tighten Allen (B),Flat Washer(D) with Allen Key (E). Bolt (B),Flat Washer(D) with Allen Key (E). STEP 4: Put Back Chair Cushion (11) and Seat Chair Cushion (10).
Page 3
STEP 5: Tie Cushion to finish Chair STEP 6: Connect Right Frame (1) & Seat Bench (6), tighten Allen Bolt (B),Flat Washer(D) with Allen Key (E). STEP 7: Connect The Part from Step 6 & Back Bench (5), tighten Allen STEP 8: Connect The Part from Step 7 and Left Frame (2), tighten Allen Bolt (A), (B), Flat Washer(D) with Allen Key (E).
Page 4
STEP 9: Connect The Part from Step 8 & Left Frame (2), tighten Allen STEP 10: Put Back Bench Cushion (12) and Seat Bench Cushion (13). Bolt (A),Flat Washer(D) with Allen Key (E). STEP 11: Tie Cushion to finish Bench STEP 12: Connect Leg Table (7) &...
Page 5
STEP 13: Connect Support Bar (8) & The Part from Step 12, tighten STEP 14: Connect The Part from Step 13 & Leg Table (7), tighten Allen Bolt (C),Flat Washer(D) with Allen Key (E). Allen Bolt (B)(C),Flat Washer(D) with Allen Key (E). STEP 15: Put Table Glass (14) on Table to finish Table FINISH...