Step 5; Step 6; Step 7; Step 8 - Advantage Controls MegaTron XS Quick Steps

MegaTron Quick Steps
Connecting to internet using a option "H" WiFi card

Step 5:

8
After the controller reboots, press Setup/Run,
CONFIGURE, NETWORK, SETTINGS, WIFI
NETWORK.
(See figures 8, 9, 10, 11 and 12.)

Step 6:

9
Select your network and press Enter to accept.
(See figure 13.)

Step 7:

Enter your WiFi password then press Enter to
10
connect.
Note: Blank passwords valid on some networks.

Step 8:

Press Setup/Run.
When your controller is
properly connected, a "ON WEB" message (MT
models) or a "DR" message (XS models) will
appear at the bottom/center of the Setup/Run
11
screen.
(See figure 14.)
12
13
14
ON WEB