Related Manuals for Oracle PH200 Mk III
Summary of Contents for Oracle PH200 Mk III
- Page 1 The Fine ArT oF PlAying Music Oracle Audio Technologies PH200 Mk III Phono Preamplifier Owner’s Manual...
- Page 2 Foreword We would first like to thank you, and this from the whole team at Oracle Audio, for purchasing our PH200 Mk III phono preamplifier. We really appreciate your trust in our products. This is your PH200 Mk III Owner’s Manual. The following pages will describe the key features, connectivity and safe operation of your new phono preamplifier.
- Page 3 Important information It is imperative to always turn off the PH200 Mk III before making changes to the loading settings and it should even be unplugged from the wall outlet. Turning off the amplifier or setting it on a different input than the one where the phono amplifier is connected is also a good precaution to take.
- Page 4 Important note 2 : The PH 200 Mk III phono amplifier is not designed to operate with phono cartridges under 0,35mV. For MC’s with output higher than 3.0mV use the 41.5dB gain of position R7. Oracle Audio Technologies PH200 Mk III phono preamplifier...
- Page 5 Connect to those RCA connectors the RIGHT / LEFT RCA cable to your preamplifier or integrated amplifier. Important note: The PH200 Mk III must always be connected to an auxiliary input on your amplifier or pre- amplifier and never should it be connected into a phono input !
- Page 6 Position it as far as possible to amplifiers and away from power cords. This will prevent this unwanted energy to pollute the signal with noise which thus would lessen the performance of the PH200 Mk III and your musical experience. Specifications...
- Page 7 Maintenance and service: Any repair and / or modification done to the PH200 Mk III must be carried by an Oracle Audio authorized service center or directly at the Oracle Audio factory. For more information please contact your dealer, distributor or contact us directly at Oracle Audio.
Need help?
Do you have a question about the PH200 Mk III and is the answer not in the manual?
Questions and answers