Accessories - Husqvarna 967 69 09-35 Operator's Manual

Saw chain/guide bar
Type of drive sprock-
et/number of teeth
Saw chain speed at
133% of maximum
engine power speed,
ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 545 Mark II, 545G Mark II,
550 XP Mark II, 550 XPG Mark II met the safety
requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
Approved cutting equipment - 545 Mark II and 545G Mark II
Guide bar
Length, in/cm Pitch, in
13/33 0.325
15/38
16/41
18/46
20/50
34
Husqvarna 545 Mark
II
Rim/7
83.3/25.4
Gauge, in/mm
0.050/1,3
Husqvarna 545G
Mark II
Rim/7
83.3/25.4

Accessories

We recommend only to use the listed guide bar and saw
chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Note: The usable cutting length is usually 1 in less than
the nominal guide bar length.
Saw chain
Max. nose ra- Type
dius
11T Husqvarna
SP33G
Husqvarna 550 XP
Mark II
Rim/7
85.6/26.1
Length, drive
links (no.)
56
64
66
72
80
544 - 006 - 04.06.2020
Husqvarna 550 XPG
Mark II
Rim/7
85.6/26.1
Low kickback
Yes