Advertisement
Link your thermostat to your Web interface
Connect to your network, the
wireless thermostat that is
closest to the GT125 by
1
pressing simultaneously
Initiate the connectivity
the
session by pressing the
button on the GT125.
Wait until the light flashes
green, indicating that new
devices can be added to
your network.
nevi
FR
web
4
You have an account
Login
Link your network
Stay connected
to neviweb
®
Sign in
Forgot your password
To link your wireless
You don't have an account
network to neviweb ,
®
Create your account and manage remotely
your network of devices.
Register
refer to your GT125
Web interface user's
guide.
nevi
web
For more information, visit our website at:
www.ouellet.com
On the thermostat
display:
and
button.
Flashes = Connecting
Remains lit = Connected
2
If the connectivity fails,
an error message will
appear on the display.
Refer to our website to
troubleshoot the unit.
3
Connect all your wireless
thermostats the same way, by
going to the next closest
thermostat.
3rd
When all the
thermostats are
1st
connected, press
again on the
2nd
Interface
button of the GT125 to
close the connectivity
session.
Advanced Settings
All of the thermostat's settings can be set through the Web.
However, if you have not created your wireless network and
need to change the temperature format or the control cycle,
you need to:
Get the setpoint to its minimum
and hold the
button for 3
seconds to access the menu.
3 sec.
Press the
button to change the setting.
Press the
button to select the next parameter.
Press and hold the
button for 3 seconds to exit the
menu and return to normal display.
Order
Parameters & settings
Default Display
Control Cycle
1
SHRT
(short cycle for electric baseboard)
FAN
Cycle
(long cycle for fan forced heater)
Temperature display format
°C or °F
Temp
Transmitter Module IC: 7693A-89XAM9A / FCC ID:OA3MRF89XAM9A
This device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device does not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment OFF
and ON, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Five (5) years limited warranty
OUELLET CANADA INC. warrants the components of the OTH2750-GT and
the OTH4000-GT against defects in material and workmanship for a five (5)
year period from the date of purchase, under normal use and service, when
proof of purchase of such is provided to the manufacturer. The obligation of
Ouellet Canada Inc., under the terms of this warranty, will be to supply a new
unit and this releases the manufacturer from paying the installation costs or
other secondary charges linked to replacing the unit or the components.
nevi
web
If you have any questions on the product,
call our technical support team at:
180, 3e Avenue, L' Islet (Quebec) G0R 2C0 CANADA
Phone : 1 800 463-7043 · (418) 247-3947
Fax : 1 800 662-7801 · (418) 247-7801
www.ouellet.com · info@ouellet.com
660-1130-0000-D
Advertisement
